Small Animal Ear Tags – Mouse Ear Tags – Style 1005-1

Styles 1005-1, 1005-1L1, 1005-1LZ, 1005-1L2, 1005-1L2Z, 1005-1BC

View 20 40 60 Showing all 7 Results
Product successfully added to your cart. View Cart

Quick Ship Options:

View 20 40 60 Showing all 2 Results
Product successfully added to your cart. View Cart

3/32″ height x 1/4″ length (inside dimensions)

2.3800 mm height x 6.35 mm length (inside dimensions)

.018″ Monel 2.36 mm wide (Plain/Silver – No other colors available)

3 digit consecutive stamped number will fit on one side – 6 digit is available but will extend around the other side of the band.
Numbering starts with two preceding 0’s (For Example: 001-1000).

STANDARD STAMPING IS ON POINT SIDE. STANDARD NUMBERING IS ON HOLE SIDE.

Approximately .25 grams per tag.

USES INCLUDE: Small Animal Ear Tags, Research/Lab Animal Tags, Fish Tags – (Fingerling), Mouse Ear Tags, Rate Ear Tags, Duck Foot Web Tags

Note: Laser Etched 1005-1 tags are not recommended for chinchillas.

Weight Special EACH PRICES WITH VOLUME DISCOUNTS
StyleDescriptionper 1000Charges11002003004005006007008009001000500010000
1005-1Size 1 - Stamped Number1 lbB,F0.2710.2390.2280.2230.1820.1810.180.1780.1760.1430.1370.131
1005-1L1Size 1 - Laser 1 Side (1-6 Characters)1 lbF*0.3880.3250.2190.2140.208
1005-1LZSize 1 - Laser 1 Side (Max 11 Characters)1 lbF*0.4150.3510.2330.2270.22
1005-1L2Size 1 - Laser 2 Sides1 lbF*0.480.4150.3140.3030.29
1005-1L2ZSize 1 - Laser 2 Sides (Max 11 characters per side)1 lbF*0.5150.4520.340.3270.314
1005-1BCSize 1 - Laser Bar Code & Number1 lbF*0.770.690.550.4560.418
1005s1Stainless Applicator for 1005-10.5 lbs58.00

Special Charges could apply to these tags.

SPECIAL NUMBERING SETS: Contact us for a quote for any special numbering sets.
Special Charge F could apply.
*If an Excel spreadsheet is submitted with your numbering, you may waive the extra “F” charge on laser etched tags.

Stainless Steel Applicator: Style 1005s1
Place the ear tag in the applicator keeping the hole side of the tag flat against the jaw of the applicator with the indentation. Locate the tag within the ear, applying beyond a ring of cartilage. After sealing, be sure to check that the tag point has come through the hole and bent around sealing properly. Tags should be washed in alcohol or similar cleaning solution to help prevent infection to the ear.

mouse ear tag applicator

mouse ear tag applicator

Our Stainless Steel Lab Animal Tag Applicator is designed to seal the tags with minimal pressure, while providing a good, secure seal.
This 1005-1 Applicator can be used with or without the spring. The spring applies slight closing pressure to help hold the tag in the applicator prior to sealing