Wet Tumble Your Stainless Steel Tags

We manufacture all our metal tags here in our factory, which means there are different tag finishes that we can provide for our customers.

For stainless steel tags, we like to recommend wet tumbling for a smooth finish. It is only an extra $15/1000 tags (Special Charge H) and it will remove any rough edges on your tag. This is an easy way to ensure that if your tag is dangling and someone grabs it, they will not harm themselves on a sharp edge. If your tag is going to be mounted, then you might not need the wet tumble finish. Polishing is recommended for any stainless steel tags that are going to be used as keychains or be handled often. Not sure which finish is right for you? Just request free samples of each finish here!

Direct from Press
Free – By request
Tags have die-cut edges and are covered in an oil residue.

Dry Tumbled (De-Oiled)
Free- Standard Finish
Oil residue is removed, but tags may have a sharp die-cut edge.

Wet Tumbled (Smooth Edges)
$15/a thousand
Oil residue and sharp edges are both removed, can cause some scratches to the tag.

Polished (Premium Finish)
Call for quote
Tags are smooth and shiny, with no sharp edges.